Parameter:

Wavelength(nm):980

Output Power(mw):60

Working Current:<100mA Working Voltage: 5.0VDC Duty Cycle: 5 minutes on, 1 minute off TTL frequency:0-15KHz Material and Color:Brass TTL modulation Voltage:0-5V Off low, high open, normal status open Dimensions: Housing 8x13mm Lens 7mm

Detail:

Three-wire input, the red line is positive, black line is negative, TTL signal yellow line is positive,If you only connect its black wire and red wire, the laser would not work, you also need to connect its yellow wire (TTL+) to 5v+.

This 980nm laser module with driver built-in is an industrial electronic component and used for Industrial testament, Lab.Before carrying on some laser DIY activities, please read about the technical information first and protect your eyes before laser ray. Be sure the operator has experience in optics DIY or testing.