Specification:

Brand: WAINLUX
Model: K6
Material: ABS
Control Model: PWM
Operating System: WIN-7/8/10; IOS, Android
Applicable Materials: Paper/Wood chips/Plastic/Stone/LeathWare/Cloth
Interface specification: 3W Laser
Wavelength: 450nm
Working Area: 80*80mm
Total power: 17W
Output Optical Power: 3W
Graphic Format Supported: JPG/JPEG/BMP/TIF/GIF
Image Size: 0.05mm
Machine Supply Voltage: 12V 2A
Control Line Installation Method: There is not need to install the machine.
Best Focus Range: 30-50mm
Best Focus Length: 100mm
Safety Warning: There has warning signs, If the machine has moved or overturns, the laser will be turned off automatically.
Recommended application machine: Computer operated engraving software, mobile phone app operating engraving software
Product size (L x W x H): 172 x 172 x 162mm

Feature:

1.Movement Protection: Using a sensitive 3-axis accelerometer for motion deception, it will notice an accidental movement during
operating, and Wainlux will shut down immediately.
2.Small Size. Powerful Laser.
3.The mobile phone or computer can work continuously in an offline state, and at the same time, the last pattern can be memorized and manually engraved. By including a One-Click Button for offline engraving, you can set your Wainlux to engrave without a constant connection.
4.Thanks to its innovative rail and baseless design, the Wainlux can engrave objects of any size so long as they are kept horizontally stable under the laser’s XY axis.
5.Engrave Your Design On Almost Any Object：Metal Spray Paint, Leather，Wood, Bamboo, Plastic, Paper.
6.Maximum Customization，Durable Design.

Note

1. The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use.
2. Do not use the laser head to point at human or livestock,do not use laser to point at people’s eyes.
3. Laser has power.skin exposure to laser is strictly prohibited.
4. The caving machine should not be stopped while working,it will cause a damage.
5. This product not suitable for kids under age of 14.
6. Software can support Operating System: WIN-7/8/10; IOS, Android.
7. Do not fall or make any collision to the product.
8. The shell with laser cutting technology,sharp edge,please pick up and down gently to prevent scratches.
9. Metal, glass, crystal and transparent or translucent stuff are can not be engraved.
10. The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated.
11. You might need to temporarily shut down the antiviruss software before downloading the software. Otherwise some files in the software would be mistaken for viruss and deleted by antiviruss software.
12. Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time.

Parcel including:

Laser engraver
USB disk
USB cable
Power adapter
Craft paper
Black card
Test board
Operating instructions
1 x Chinese / English manual
(distribute the adapter according to your country)

^v^  FAQ

1. The machine has no response after it is powered on.

1) Check whether the power plug of the machine is properly inserted into the socket；

2) Check whether the power socket is powered on and whether the switch is on;

3) Check whether the red power switch on the machine is on.

2. The machine is not connected to the computer.

1) Check whether the USB cable properly connects the computer (the cable should be connected to the port at the back of the desktop computer) and Is the machine connected normally；

2) Check whether the red power switch on the machine is on, whether the laser is slightly bright, etc.

3) Check whether the driver software has been installed on the computer. If there is an exception during the installation, shut down the computer and restart it, and then re-install the driver software；

4) Check whether the computer is normal. Scan and kill the virus, restart the computer and try again;

5) Pull out the USB cable and power plug, and plug them in again after 5 seconds.

3. There is no response when the mobile APP is connected with the machine.

1) Check whether the red power switch on the machine is on, whether the laser is slightly bright, etc.

2) Check whether the phone is normal. Scan and kill the virus, restart the phone and try again;

3) After the machine is powered on, it can only be connected effectively once. If the machine or mobile APP is

4) shut down midway, the machine can only be connected again after the machine and mobile APP are restarted； To connect the machine with the mobile APP, the machine must be powered on and return to Standby Mode. Open the mobile APP to connect the machine.

4. The machine can’t engrave patterns

1) Laser module not well focused: adjustlaser focusaccording to user manual.

2) Check if there is any debris in the light outlet of the laser head. If any, remove it before engraving

3) Check engraving power and depth parameters, and they cannot be set too small.

5. Unclear engraving

1) Clean the light outlet of the laser head with alcohol to remove dust or sundries;

2) Increase the engraving depth until the desired engraving effect is achieved(the depth and power of engraving should be increased or decreased repeatedly depending on the desired effect);

3) Check whether the machine is placed flat. The machine must be placed on a level table when working.

4) The image imported must be clear and its color must not be too light, which will affect the engraving effect.

6. Questions about one-key of line engraving

1) Engraving stops midway:The image is not downloaded completely;re-download the image;

2) There are no patterns or patterns are unclear:The engraving power and depth parameters are not set correctly when the image is downloaded;

3) There are extra lines when the image is engraved:The computer may have a virus;kill the virus of the computer;restart the computer; re-download the image.

^V^   BUY TIPS

After-sale Protection

1.If you are missing parts or accessories, please contact us within 3 days after receiving the package and we will send you a replacement free of charge.

2.If there is any problem with the product that cannot be used normally, please contact our customer service, provide photos and operating videos,detailed description of the product problem, and we have a professional team to solve the product problem for you. ^v^

3.If the parcel is lost or damaged, please contact the Courier first to find or compensate for it.

4.If you have any problems, please don’t rush to bring disputes, please contact us, we will solve for you until you are satisfied.