About F30130 laser module:

F30130 is suitable for users who have requirements for work efficiency and air compressor equipment. The module can cut 4mm plywood (0.6-1.5Mpa pressure) at a time, with a maximum thickness of 5mm, and adopts a very simple focusing method. The focal length of 5mm can block more than 95% of the light and is safe to use.

1. Larger area, 460 x 810 mm engraving and cutting area .
2. High power: 30w laser module, 7.5W Optical power output,focal point 0.1mm, support engraving and cutting.
3. Professional, support the latest grbl 1.1f firmware, support laserGRBL, benbox and lightburn software.
4. The most simple and portable engraving experience: support NEJE series software, including NEJE android APP, NEJE windows software, NEJE mac software, NEJE wireless APP for iOS, ipadOS, macOS. NEJE Scanner APP.
5. Safety design, the laser module comes with a protective panel design to block more than 90% of the leaking light; built-in MEMS Roll protection.
6.Quiet use, intelligent drive, can automatically adjust the fan speed according to the laser temperature.
7. Two ways to adjust the focus, you can directly adjust the focus, you can also adjust the focus to a fixed position, use a fixed thickness board to adjust the focus, which can simultaneously take into account the use of engraving and cutting.
8. Support NEJE 4pin interface series modules, including 3500mw, 7W, 20W, 30W, 40W, etc.
9. The product has passed the quality control of NEJE factory. If it is a quality problem, we provide a 2-year warranty!

Package Include:

Laser engraving machine 1,
4060 module 1,
12V3A power supply 1,
European standard adapter 1,
Manual 1,
Red glasses 1,
(Data cable1, wooden board 1, paper 5, pen 1, brush 1, focusing film 1, angle iron 4,alumina film 1, cable tie 3, nut 5, large hexagonmwrench 1, small hexagon wrench 1,Open wrench 1)

Please Note

If there is a customs spot check, the customs duty is borne by the customer,hope you can understand. Do not accept bad reviews and disputes due to tariffs.