Description
- Condition: New
- Model Number: CNC3018
- CNC or Not: CNC
- Feature 1: CNC3018 Pro Laser Engraving Machine
- Feature 2: Laser Engraving Machine
- Feature 3: CNC3018 Pro
Mini CNC3018 Pro 15W Laser Engraving Machine with 500mw 2500mw 5500mw Head ER11 Wood Router Wood Carving CNC 3018 PRO
JP120503
working area |
30×18×4.5cm |
Frame size |
33×40×24cm |
Mesa |
30×18cm |
Spindle |
775 spindle motor(12-36V)24V:10000r/min |
Step motor |
Fuselage 1ength 34M,Current 1.33A,12v.Torque 0.25N/M |
Power supply |
24V 5.6A |
Software |
GRBL controller (Firmware GRBL v1.1) |
supported system |
Windows(Do not support Mac) |
Drill bits |
Free 10pc drill bit |
clamps |
Free 4pcs |
CNC 3018 Pro Firmware GRBL v1.1 control Diy mini cnc machine,3 Axis pcb Milling machine,Wood Router laser engraving,with offline controller
The 3018PRO is easy to operate and supports offline. The control panel is also equipped with a versatile 3018 board. It supports 2P or 3P lasers. Equipped with a laser with a 33mm acrylic blue size.Customers who purchase the standard can install 33mm 2P 3P lasers.
CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL; Supported System: Windows XP / Win 7 / Win 8 / Win 10.
CNC3018pro parameters
working area :30×18×4.5cm
Frame size:33×40×24cm
Mesa:30×18cm
Spindle:775 spindle motor(12-36V)24V:10000r/min
Step motor:Fuselage 1ength 34M,Current 1.33A,12v.Torque 0.25N/M
Power supply:24V 5.6A
Software:GRBL controller (Firmware GRBL v1.1)
supported system:Windows(Do not support Mac)
Drill bits:Free 10pc drill bit
clamps:Free 4pcs
JP120501/JP120502/JP120503/JP120504/JP120505
Package inclued:
1pcs Full set engraving machine
4pcs clamp
10pcs bits
1pcs extension rod with ER11 collet
Frequently Asked Questions:
Q: Whats the different between 500mw laser, 2500mw laser, 5500mw laser
A: All these lasers can not engrave/mark on any metal, they are mainly used on engraving wood.
2500mw laser can cut about 1mm normal wood.
5500mw laser can cut about 2mm normal wood, engrave on leather and soft plastic.
Laser: 500mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v
clamps: 4 pcs, Hold the thickness of 0-30mm,size: 50 * 20 * 3 (length * width * thick), the inner slot width 6mm
Attention
This machine does not work on metal. Mainly used to engrave wood. Please contact us for further information.
Please note MDF is not equal to normal wood, as it doesn’t have a worldwide standard, so you need to test how deep the laser can cut by yourself.
Reviews
There are no reviews yet.