Description

Laser Diode Stack Repair:VS-MA-50-10 Model H 10bars 500W Laser Diode Stack Repair

1.product description

This diode laser stack 10bar Model H for hair removal which has 10bars with a aluminum shell. The water holes are at the bottom of the stack. Actually, Model H is Model G without water connector.  Electrodes are on the back of stack.

It is used for most of diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064. 
This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

In the past 10 years, we have repaired various brands and different types of macro channel and micro channel cooling lasers(such as alma, dilas, focus light etc.), which are used on laser hair removal handle pieces.
Generally, the main problem of these diode laser stacks is:
Some or all of diode laser bars were burned.
Followings are some reasons that cause burning the diode bar problem
Temperature
* Using machine for too long time. it causes that the temperature becomes too high.
* The water flow rate is low. It causes the bad heat dissipation.
* The room temperature is a bit higher than normal, when using the machine.
Humidity
* The environment for the machine is too humid.
Quality
* Using bad quality diode bar.
* laser diode bar mounting technology couldn’t reach the standard.
* The electronic control parameters don’t suit for the diode laser stack

Oriental-Laser Provide Service:
Professional 10bars GT Macro Channel Cooling Laser Diode Stack Repair / replacement
GT Laser Diode Stack Customized
Service Warranty:
Oriental-laser offers 6 months warranty for the micro channel cooled laser stack.

2.product display

After repair

3.Specification

4.Dimension

5.Related Products（Please click on the picture below）

6.Company informations

Welcome to contact me at any time.