Description

Indutrial 532nm 100mw Green Dot Laser Diode Module Point Lazer 12V Driver TTL Fan Cooling Long-time Work

Parameters

Output Wavelength:532nm

Output power:100mw

Spot ellipticity:> 0.9

Laser Shape:Dot

Focusable:N/A

Idemitsu height;15mm

Divergence angle:<1.2mrad

Operating temperature: 0 ~ 40 ℃

Modulation: TTL level (0 ~ 20K)

Input voltage: DC / AC 12V

Laser Size: 55 (L) X30 (W) X30 (H)

Features

1. Connect the power plug after turning on the switch.

It is applied for 10 minutes after power into a stable state.

Switching power supply interval should be greater than five seconds, or easily damage to the laser.

Power Plate should be placed on the insulator

2When you use the power supply board should be placed on an insulator or overhead,

Otherwise, bad baked laser power.

Avoid laser internal wiring circuit.

3. To make the laser heat well, please laser fixed on a flat metal plate.

4,Please note that the use of the dust, the dust can not be used in place too, if the laser is not a long time in the light hole stickers affixed dust.

Package

1pc Industrial 532nm 100mw Green Dot Ray Laser Diode Module