5500mW/15W DIY Laser Engraver Machine 45*45 Engraving Machine 2Axis Wood Router Mini Marking Machine Advanced Toys

1. Please look for the official store, other similar products are imitations.

2. The product is newly upgraded, making it easier to install, disassemble and replace the laser module.

3. The product has been upgraded with more supporting components, which can be expanded into CNC engravingmachine, writing robot, etc. The expansion components need to be purchased separ.

Friendly Reminder

1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!

2. The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect to the board correctly!

3. The laser module can not be used continuously for more than 30 minutes at a time. If there are any other quality problems (except for damage caused by improper use of the laser), please feel free to contact our customer service.

4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.

5. If you have any quality problems with the machine, please do not initiate a dispute immediately, please feel free to contact us. Many operational issues can be resolved, you can send your problem description to us via image or video. Thank you in advance.

Brand: JEEL

Model: 4550

Material: Aluminum Profile

Working area: 45cm *45cm

Packaging Size: 68x40x12cm I 26.77×15.75×4.72inch (L*W*H)

Package Weight: 6.50kg

Can Engrave: Determined by laser module power

Laser Power: 5.5W

laser Wavelength: 450nM

Beam Shape: 0.1mm Point

Focal Length: Less than 3cm

Material: Aircraft Aluminum,Copper

Power Support Input Voltage: DC 12V

PWM Support Input Voltage: DC 5V

Power Supply Interface : XH2.54*3P

Driving mode: External ACC Constant Current Drive

Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/

Cork Wood/Stainless steel

Can Not Engrave:Metal/Glass/PCB/Reflective Material/

Transparent MaterialStone

Laser Power : Pulse 15W average 8W

laser Wavelength: 450nM

Beam Shape: 0.1mm Point

Focal Length: Fixed focal length

Material: Aircraft Aluminum,Copper

Power Support Input Voltage: DC 12V

PWM Support Input Voltage: DC 5V

Power Supply Interface : XH2.54*3P

Driving mode: External ACC Constant Current Drive

Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/

Plywood/Foam Paper/Anodized Aluminum/Ceramics/

Stone/Stainless steel

Can Not Engrave : Metal/Glass/PCB/Reflective Material/

Transparent Material

Detailed pictures