Description

Package Included:
1x DIY Desktop Mini Laser Cutting / Engraving Machine
1x Laser Machine Tools Kit

Item Specifics:
Material: Stainless steel and acrylic
Working Voltage: DC 12V
Laser Power: 2500mw/3500mw/5000mw
Size: 72x63cm / 28.3×24.8 in
Engraving Area: 65x50cm / 25.6×19.7 in
Control software: benbox software support power can be adjusted, weak light positioning
Engraving Material Note
1.can engraving materials: foam, wood, bamboo, plastic, paper, thin leather, bank card, rubber
2.can not engraving material: metal, stone, ceramic, shell, light-reflecting material,
transparent material

Attention:
! In the process of using, please wear professional protective glasses
! Forbid children to play
! Suggested that the laser light in the case of focus, the power is too strong, do not use strong
light to illuminate the skin
! Avoid the use of flammable objects or gases in order to avoid causing a fire or explosion
Data download link:
https://drive.google.com/openid=0B-KRH6E-ysnRWm02LWVsWjYyT28
If you do not know how to use and operate the product, you can ask our customer service for a video tutorial.

For detailed assembly and operation, please refer to the attached CD, such as CD damage or unable to read, please contact the owner of SkyDrive download, note as follows:
1. laser head continuous operating time should not exceed 1 hours, such as more than. Please stop working and cool down for at least 15 minutes before re operation
2. the correct wiring is as follows, and must be operated in this order. Otherwise, the laser head or the driver plate will be burned.
The right wiring is very, very, very, very, very, very important, important, important
1. refer to the installation tutorial, video instructions, assemble the machine
2. install drive and corresponding software
3. connect the computer to the machine through the USB data line
4. please don’t change the control panel firmware without warranty
5. plug the power plug into the control card
6. press the red switch on the control card (if there is a red button)
7. open the software online and begin testing the engraving

Note:
1.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.
2.The colors may have different as the difference display, please understand.