15W New CNC3018 Engraving Machine ER11 with 500mw 2500mw 5500mw 15000mw Blue Laser Head Wood Router PCB Milling Machine

The latest laser, blue laser, is more stable! ! !

Product information:

working area	400*330*240mm
Frame size	300 x 180 x 40mm
Mesa	30×18cm
Spindle	775 spindle motor(12-36V)24V:10000r/min
Step motor	Fuselage 1ength 34M,Current 1.33A,12v.Torque 0.25N/M
Power supply	24V 5A
Software	GRBL controller (Firmware GRBL v1.1)
supported system	Windows(Do not support Mac)
Drill bits	Free 10pc drill bit
clamps	Free 4pcs

Disassembled pack mini CNC 3018 laser head CNC engraving machine 500MW/2500MW/5500MW/15000mw Milling Machine Wood Carving machine DIY MINI CNC router with GRBL control

NEW CNC Firmware GRBL v1.1 control Diy mini cnc machine,3 Axis pcb Milling machine,Wood Router laser engraving,with offline controller

The Firmware GRBL v1.1 control is easy to operate and supports offline. The control panel with supports 2P or 3P lasers. Equipped with a laser with a 33mm acrylic blue size.Customers who purchase the standard can install 33mm 2P 3P lasers.

Package inclued:

1pcs Full set engraving machine

Free gift:

20 degree knife x 10

ER11 Kit x 1

Mini clamp x 4

Specification:

• Control software :GRBL control
• Construction:Aluminum + plastic
• Laser power: 500MW/2500MW/5500MW/15000mw
• Working area :300*180*40mm
• Frame size:400*330*240mm
• Spindle:775 spindle motor (12-36V) 24V: 7000r/min, 36V: 9000r/min
• Step motor:1.3A 0.25N.m
• Wire rod:T8
• Power Supply :24V 5A （110V -240V）
• Support System:Windows XP / Win 7 / Win 8  / Win10
• Standard :The complete set of the parts and tools

500mw/2500mw/5500mw engraved material: Plastic, wood, acrylic, PVC, PCB and other soft materials

Cuttable material: paper, wood board within 3MM (slow speed, need to cut repeatedly), leather, cloth, etc.

The 15W can also be engraved on the stainless steel surface and the anode colored aluminum alloy surface on the basis of 5500mw. (When drawing the surface of the 304 stainless steel, please use a large pen to blacken the surface and then engrave)

Anything transparent and translucent and silver reflective can’t be cut!!!

Important Notice:

1. All the light utilized on this CNC machine cannot work on any metal. The light cannot cut plywood.

2. ER11 needs shrink fitting. Both the spindle and ER11 have the correct diameter, but ER11 is designed to enjoy minus tolerance to the spindle so you cannot put it on directly.

3. Contact us for more details.

Product Display: