LaserSE

All Lasers in Life Science Industry info@laserse.com

oxlasers NEW 12V 2.5W 3.5W 4W 5.5W 15W 450nm blue laser modules with Orange Color for DIY Engraving laser head with PWM

  • Home
  • oxlasers NEW 12V 2.5W 3.5W 4W 5.5W 15W 450nm blue laser modules with Orange Color for DIY Engraving laser head with PWM

oxlasers NEW 12V 2.5W 3.5W 4W 5.5W 15W 450nm blue laser modules with Orange Color for DIY Engraving laser head with PWM

$153.06$440.70

SKU: 32978460122 Category:

Description

  • Brand Name: Oxlasers
  • Certification: NONE
  • Origin: CN(Origin)
  • Model Number: ORANGE 3W

Technical Parameters:

Laser wavelength: 445nm-450nm blue laser
Spot type: dotted (adjustable)


Output power: 2.5W(True Power)  focusable

                        3.5W(True Power)   focusable

                        5W(real output is:3.8-4W)  focusable

                        5.5W(real output is 5W)  focusable

 

                        15W(Fixed Focus, Not Focusable)

 

Size: 2.5W(33*70mm) , 3.5W(33*70mm)  5W(33*70mm)  5.5W(40*70)  15W(40*70)

Drive mode: external ACC constant current drive

Cooling method: forced air cooling
Operating voltage: 12V  DC
Control interface: 3pin  (PWM VCC+ GND-)
Shell material: aluminum, surface anodized
Collimator lens: optical glass coating

 

HEAT SINK COLOR: ORANGE

 

PACKING LIST:

 

LASER*1

3PIN CABLE*1

3PIN TO 4PIN CABLE*1

SAFETY GLASSES*1

 

BUYER MUST READING: 

 

 When you connect laser to your controller board, please pay attention to the pin positions of 12v+ GND- and PWM/TTL,  red wire=12V+, black wire=GND-. Yello wire=PWM+, white wire=PWM-(3-4pin wire). So Red Wire must be connected to the 12v+ pin on your controller board’s interface, Black Wire Must be connected to the GND- pin and Yellow Wire must be connected to the PWM/TTL pin,  if you use 3-4pin wire, White wire should be connected to the PWM- pin.

if your controller board’s laser interface pins are in different position, please change the wires position to make it match the positions of + – PWM of your interface. If the wires connected wrong, it will damage the diode and the driver board.

Please add a fan when you engraving or cutting, in case smoke blur the lens damage the lens 

IMG_5033FOCUSABLE LENSSIZE790IMG_5010IMG_5020IMG_5022IMG_5028

 

15W is not focusable!!

IMG_6258IMG_6263IMG_6266IMG_6268IMG_6270IMG_6273PACKING LIST

HTB1uCidaEjrK1RkHFNRq6ySvpXad

 

HTB1ujsKaifrK1RjSspbq6A4pFXaLHTB1x9.NajzuK1Rjy0Fpq6yEpFXap

 

 

 

 

Reviews

There are no reviews yet.

Be the first to review “oxlasers NEW 12V 2.5W 3.5W 4W 5.5W 15W 450nm blue laser modules with Orange Color for DIY Engraving laser head with PWM”