Description
- Type: Other
- is_customized: No
- Model Number: LDDH-xxAyyV-MV
High voltage and low current laser diode (ocraro, nlight, BWT..) driving power supply
Product features:
Suitable for high voltage and low current laser diode driver. Suitable for end pump side pump laser, semiconductor, welding, fiber and other lasers. Perfect for welding, marking and other applications.
Perfect voltage self adaptability, from single tube to near electric voltage
Semiconductor laser test, led, all kinds of diode test are applicable.
hall sensor
High speed, load voltage adaptive
High efficiency without any additional cooling measures
Single board design, small size, high reliability
High speed analog switch is used for internal and external control switching, which can be directly used for modulation. One analog value is working current and the other is set as threshold current
Technical parameter:
Model: lddh-1xa48v-ma
Applicable voltage: 48V.
Electric voltage: 48V (50V max)
Rated output current: 15a, specified by the user
Size:130mm * 85mm * 35mm (L * w * h)
Current rise / fall speed: 1ms
Recommended applications:
Pump, soldering
Examples of applicable products:
Knight, cover him, BWT
Interface definition
1 PVDDPower input port / 5.0mm terminal
2AN2/Pot,Second channel analog input terminalIt can be connected to potentiometer or analog quantity / 2510-3p socket
3Chsw channel (internal and external control) selection/2510-2p socket, if not connected, the analog input of CTL interface will be used by default
4CTL Control terminal/2510-6p socket
5J1voltage protection jumper interface/2510-2p socket
12 / 15V, to be disconnected,22-27v, short circuit
6LDInput / 5.0mm terminal block
A: connected to the positive pole of load LD
K: connected to the negative pole of load LD
7CVDDControl power input portWiring terminal
Optional 12V / 15V / 24V, default 24V.
Reviews
There are no reviews yet.