Description

6W RGB module increases the 445nm blue light output to ~3500mW, the 638nm red light output reaches ~1800mW, and the 520nm blue light output reaches 1100mW; as the blue power is a little strong, the final white color is a little close to cold white 7000K; and if you don't prefer this, the 5W RGB module will be a better choice.

The Whole Package

The whole set includes: 1pcs 6W RGB laser module together with modulation board, 1pcs 120V~240Vac input 12Vdc output power supply. (include 1 pair 10cm red and black color cables.)

Modulation (Analog/Off Defaulted)

There is a modulation switch for changing the modulation mode between Analog and TTL, the default factory mode is "Analog Modulation" and the inside indicator LED is in GREEN color; if the modulation is changed to TTL, the LED will be in RED color. The laser is defaulted NON-WORKING in factory mode, it means the laser will not give off light after we connect the whole set to the AC source, the laser only gives off lights after receiving modulation signal.

Important Notice

NEVER try to increase the output current of any laser diode by rotating the adjustable resistor on the modulation board, all the diodes are nearly driven by their full powers, and the over driving will burn the diodes in only 0.5~2 seconds.

The power supply is only strong enough to the module, please DON'T add the other loading to it.

Module size

The 6W module is the same dimension of 3W, 4W, and 5W RGB module

Modulation board size

Pls install the module on the metal plate or another heat sink for faster heat dissipation.

Live Effect