Y Axis Rotate Engraving Module Rotary Jig, for Column Cylinder Engraving DIY Upgrade Laser Engraving Module Kit

• The rollers are thickened, and high-quality wear-resistant materials are used to increase friction and have a better clamping effect.

• Thicken and widthen the bottom plate, more stable when working.

• Very easy to install, no need to change software, control board or any other accessories, turns your Laser engraver machine to a rotating engraving machine.

• It is very suitable for engraving cylindrical objects of different diameters, such as pots, pens, balls and other engravable cylinders.

• It occupies a small volume, no need to raise your engraving machine for operation.

• Minimum processing length：50mm

• Maximum processing length：400mm

• Minimum clamping diameter：10mm

• Maximum clamping diameter：100mm

• Two models are available, the color of the roller and the size of the acrylic plate base are different.

Usage：

1. Pull out the 4-pin wire on Y axis stepper motor of Engraver.

2.Then insert the wire on stepper motor of Rotate Engraving Module.

3. Place Rotate Engraving Module under the laser module and start to engrave.(Need to change parameter of Y axis on GRBL software)

• Type 1

• Type 2（With blue/green roller and larger size base）

Loosen the screw to adjust the distance between the rollers

Loosen the screws to tighten the timing belt

The engraving length is 50-400mm