445nm-1000mw Gold Laser Module DI Messa A Fuoco Blue Laser Incision Laser Testa, 1W Laser Diode Tube 2p Port

product features :

This 445nm 1000mW focusable blue laser module is equipped with constant current driver board, plane Aluminum heat sink and cooling fan ideal for DIY laser cutting equipment use with stable output power and Long life!

User should read:

1. The laser module power is relatively large, for industrial use only, to avoid eye exposure, otherwise
Cause permanent blindness, sequelae at your own risk.

2. Do not use in flammable and gas environment to avoid fire and explosion

3. Children are not exposed to this laser product.

4. Do not open the module to avoid damage.

-Metals, glass, stone, ceramic, jewelry, silver, reflective material, translucent material cannot be processed.

-Carving wood / bamboo / paper / plastic / leather / rubber / horn.

-Can cut paper-thin / light wood / sponge paper / felt / fabric / sticker.

prodduct specification：

– Laser wavelength: 445nm (blue viole)

– Point type: dotted (adjustable)

– Light power: 1 watt (1000 mw)

– Drive mode: external ACC DC drive

– Cooling method: forced air cooling

– Operating voltage: 12V DC

– Power supply interface: 2 * 2.54

-Control interface: 2 * 2.54 (TTL control switch PWM control)

– Housing material: aluminum, anodized surface

– Module material: copper

product picture :

Frequently asked questions:

Q : How to focus the laser?

A: First of all, you need to press the weak light button on the top of the laser.
Q: Where is the TTL port? Can I only see the PWM?

A: TTL and PWM are supported and you can only choose one of them. It means you can connect the PWM port of this module

To the PWM (or TTL) port on your recorder’s control board. But make sure that the voltage source of that port is DC 5 V.

Q: How can I connect this module to my recorder?

A: If you don’t need the PWM function, you can directly connect the Power port to the Motor port (12V, GND) on your control

Board Y leaves the PWM port unconnected.

User should read:

– The laser module power is relatively large, for industrial use only, to avoid the exposure of the

Be careful, otherwise it will cause permanent blindness, the consequences at your own risk.

– Do not use in flammable and gas environments to avoid fire and explosion.

– Avoid exposing children to this laser product.

– Do not open the module to avoid damage.

FAQ:

Q: Do I need to assemble this machine when I received it?

A: This machine comes as a kit. You have to assemble it yourself. All tools and parts are included

In the kit

Q: Is there software and instructions to receive it?

A: You can get the software, please contact us.

Q: What computer system can your software use?

A: The software is only compatible with Windows system.

Q: What is the life of the laser?

A: The laser module has more than 6,000 hours of service life.

Q: What material can you engrave?

A: wood, bamboo, plastic, paper, leather, rubber.

Q: What material can you cut?

A: cork wood, paper, fine leather.

Q: Can I use it to cut or engrave on metal?

A: It cannot engrave or cut on any metal.

Q: Can I regulate the laser power, or is the laser power adjustable?

A: The fixed power of the laser is not adjustable, but the engraving speed is adjustable.

Q: How long can the machine work continuously?

A: About 45 minutes can work continuously, after the laser mold cool down (about half a

Time), then start working again. Long time continuous work with shorten laser module

Liftetime!

Q: When you receive it, how to let it work?

A: First, you need to connect the power cable of the stepper motor to the control board, then installl

The software and the driver, the power supply of the machine, that’s it.