CNC 40 * 50cm working area 500mw/2500mw/5500mw/7w/10w laser machine

Desktop DIY 4050 Laser Engraving Machine with offine control

​

Specification:

Type: 4050 Laser engraving machine

Working area : 40*50 cm 

Machine material：aluminum material + acrylic

Software: laser GRBL

Power supply :  12V 

Voltage: 110V and 220V

Power: 1W/1.6W/2.5W/3W/5.5W/7W/10W/15W

weight :about  5.5 KG

Drive control board: newly upgraded 2 axis CNC control panel

Miniature engraving software: (R & D) GRBL compatible housekeeper

Motor: new high quality 4 phase 2 wire stepper motor

Power supply: 2A 12V (110-240VDC)

Frame material: thick acrylic 4020 aluminum shapes

 

 Note:

1.can engraving 

 materials:horn,wood,bamboo,plastic,paper,leather,bank card,rubber ,  part of the cortex (purse), plastic phone shell

7W , 10 W , 15 W laser can engrave the metal ( Stainless steel surface and anodized aluminum )

2.can not engraving material:metal,stone,ceramic,shell,light-reflecting material,transparent material, soft materials.

3.Cutting Material:

It can only cut foam,paper,thin leather material.

It can cut the maximum thickness of the product is about 1mm cutting board, 2mm plywood, 1mm mdf, 2mm PVC board, 4mm foam, 3mm paper.

 

The product has a lifespan of 8,000 hours, it can last for 1 hour, and then it takes 10 minutes to rest.

 

Note:

1.In the process of using, please wear professional protective glasses

2.Forbid children to play

3.Suggested that the laser light in the case of-focus, the power is too strong, do not use strong

light to illuminate the skin

4.Avoid the use of flammable objects or gases in order to avoid causing a fire/explosion

5.Don't update the firmware. Can not change the original firmware.

 

Notice: If you need the instruction of the machine, please contact us freely, and we will send it to you by e-mail.If you need EU, UK, AU plug, pls leave us message, otherwise we will sent the US plug.