5500mW/15W DIY Laser Engraver Machine 45*45 Engraving Machine 2Axis Wood Router Mini Marking Machine Advanced Toys

• Model: 4550
• Material: Aluminum Profile
• Working area: 45cm *45cm
• Packaging Size: 68x40x12cm I 26.77×15.75×4.72inch (L*W*H)
• Package Weight: 6.50kg
• Can Engrave: Determined by laser module power
• Input voltage：AC 100V-240V，50 / 60Hz
• Output：DC 12V 5A
• Engraving area：450mm*450mm
• Support software include: weidiao master, GRBL. etc.
• Support PWM TTL modulate laser power
• Support gray engraving, sketch route cutting, line scanning engraving, spot engraving.etc.
• 15W laser can engrave Stainless Steel,and can cut 3MM Cork Board!
• Can't cut any METAL
• Engraving distance:less than 3cm!
• 5.5W recommended cutting, 15W recommended engraving stainless steel!!!

 

Friendly Reminder

• Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
• The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect to the board correctly!
• The laser module can not be used continuously for more than 30 minutes at a time. If there are any other quality problems (except for damage caused by improper use of the laser), please feel free to contact our customer service.
• If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.
• If you have any quality problems with the machine, please do not initiate a dispute immediately, please feel free to contact us. Many operational issues can be resolved, you can send your problem description to us via image or video.Thank you in advance.

When you received your goods ,please test it in the first time!Test method ,as shown below!

 

 

Detailed pictures

 

 

 

 

 

 

 

Laser module:

 

Test laser:

1,use this cable,connect to your laser and power supply.

2,Use 12V 3-5A power supply.

Laser software:

 

LiteFire

 

VigoEngraver_v1.2