Description
- Brand Name: Ortur
- Origin: Mainland China
- Model Number: Ortur/Aufero Laser Module
- Certification: GS,EMC,CE
- Certification: EMC,ce,GS
- Is Smart Device: YES
- Note: All Laser Module can engaving&cutting
- Common to all modules 1: Laser wavelength 445±5
- Common to all modules 2: square laser spot
- Common to all modules 3: Material Aluminum
- LU2-2 Optical power: 1-1.6w
- LU2-2 Electric power: 10W
- LU2-2 Spot size: 0.07*0.06mm
- LU2-2 Focal length: 50mm
- LU2-2 Engraving Material: Metal/Aalyic/Plywood/Pine bodrd/Paper board/Kraft Paper/Leather
- LU2-2 Cutting Material: Leather/Paper board/Non-wovenfabrics/Kraft Paper
- Suggest For LU2-2: suitable for beginners
- LU2-4-SF Optical power: 4.4-5.5W
- LU2-4-SF Electric power: 20W
- LU2-4-SF Spot size: 0.12*0.15mm
- LU2-4-SF Focal length: 30mm
- LU2-4-SF Engraving Material: Wood/Acrylic/Ceramic/Leather/Paper/Glass/GraniteMetal/MDF/Stone
- LU2-4-SF Cutting Material: Wood/Acrylic/Leather/Paper/MDF/Non-wovenfabrics
- Suggest For LU2-4-SF: the engraving effect is better
- LU2-4-LF Optical power: 4.4-5.5W
- LU2-4-LF Electric power: 20W
- LU2-4-LF Spot size: 0.17*0.25mm
- LU2-4-LF Focal length: 50mm
- LU2-4-LF Engraving Material: Wood/Acrylic/Metal/Ceramic/Leather/Paper/Glass/Granite/MDF/Stone
- LU2-4-LF Cutting Material: Wood/Acrylic/Leather/Paper/MDF/Non-wovenfabrics
- Suggest For LU2-4-LF: The cutting effect is better
- LU2-10A Optical power: 9.5-10.5W
- LU2-10A Electric power: 40W
- LU2-10A Spot size: 0.05*0.01mm
- LU2-10A Focal length: 50mm
- LU2-10A Engraving Material: Wood/Acrylic/Ceramic/Leather/Paper/Glass/GraniteMetal/MDF/Stone
- LU2-10A Cutting Material: Wood/Acrylic/Leather/Paper/MDF/Non-wovenfabrics
- LU2-10A One Pass 1: can cutting 30mm acrylic
- LU2-10A One Pass 2: can cutting 20mm plywood
- Suggest For LU2-10A: Excellent engraving and cutting
Welcome to Ortur Outlet Store！
Aufero is the official sub-brand of Ortur factory
Note：
1. LU2-4-LF is good at engraving and better at cutting, and could support a higher speed. It has the air assist, but you need to buy a Air Compressor to support the air assist.
2. LU2-4-SF is good at cutting and better at engraving harder materials (such as stainless steel and other hard materials), and could support a higher speed.)
3. LU2-2 is good at engraving high-precision pattern, but speed couldn’t be set too high.
4. It is not that the smaller the light spot, the better the effect. When engraving photos, you may need to increase the laser spot to get a better picture effect.
5. The competitors may falsely promote the power of similar laser modules as 40W or even 60W, please take care.
LU2-4-LF
LU2-4-SF
LU2-2
