Description
- Brand Name: Hantek
- Certification: CE
- DIY Supplies: ELECTRICAL
- Origin: Mainland China
- Model Number: DSO5202BMV
- Band Width: 100-349MHz
- Record Length: 2M
- Digital Channels: 2
- Real Time Sampling Rate: 1GSa/s
- Display Size: 7 Inches & Above
- IS Battery Demountable: No
- Display Resolution: 800*480 Pixels
Hantek DSO5202BMV 2channels 200MHz 1GSa/s Digital Storage Oscilloscope Built-in Video Help
Features:
• 200/100/60MHz bandwidths
•1GSa/s Real Time sample rate
• Large (7.0-inch) color display,WVGA(800×480)
• Record length up to 2M
• Built-in Video Help
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis
Specifications:
|
Model
|
DSO5202BMV
|
DSO5102BMV
|
DSO5062BMV
|
|
Bandwidth
|
200MHz
|
100MHz
|
60MHz
|
|
Real-time Sample Rate
|
1GSa/s
|
||
|
Equivalent Sample Rate
|
25GSa/s
|
||
|
Record Length(Sample Points)
|
Single-channel: Maximum 2M; Dual-channel:Maximum 1M (4K,16K,40K optional)
|
||
|
SEC/DIV Range
|
4nS/div-40S/div (in a 2, 4, 8 sequence)
|
||
|
Delay Time Accuracy
|
500ps
|
||
|
Vertical
|
|||
|
A/D Converter
|
8-bit resolution, each channel sampled simultaneously
|
||
|
VOLTS/DIV Range
|
2mV/div~5V/div at input BNC
|
||
|
Position Range
|
±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)
|
||
|
Rise Time at BNC
|
≤1.7ns
|
≤3.5ns
|
≤5.8ns
|
|
DC Gain Accuracy
|
±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div |
||
|
Trigger
|
|||
|
Trigger Sensitivity
(Edge Trigger Type) |
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
EXT(Typical) 200mV from DC to 40MHz EXT/5(Typical) 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity |
||
|
Trigger Level Range
|
CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V |
||
|
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns) |
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
EXT: ±(6% of setting + 40mV) EXT/5: ±(6% of setting + 200mV) |
||
|
Holdoff Range
|
100ns-10s
|
||
|
Trigger Type
|
|||
|
Edge
|
Trigger on the rising or falling edge
|
||
|
Pulse Width
|
Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s |
||
|
Video
|
Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) |
||
|
Slope
|
Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s |
||
|
Overtime
|
from the rising or falling edge
Set Time: 20-10s |
||
|
Alternate
|
Internal trigger on edge, pulse width, video or slope
|
||
|
Measurement
|
|||
|
Cursors
|
Manual: The difference between voltage cursors ΔV; the difference between time cursors ΔT; 1/ΔT calculated by Hz.
Tracing: The voltage and time at a waveform point |
||
|
Automatic
|
Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
|
||
|
Display
|
|||
|
Type
|
Right angle 7″TFT 16-digit color LCD
|
||
|
Resolution
|
800*480 dots
|
||
|
Contrast
|
16 gears, with the progress bar to show adjustment
|
||
|
Interface
|
USB host and USB slave
|
||
|
Power Supply
|
|||
|
Voltage
|
100-120VACRMS(±10%),45Hz to 440Hz,CAT II
120-240VACRMS(±10%),45Hz to 66Hz,CAT II |
||
|
Power
|
<30W
|
||
|
Fuse
|
2A, T rating, 250V
|
||
|
Mechanical
|
|||
|
Size
|
Length: 313mm Width: 108mm Height: 142mm
|
||
|
Weight
|
2.08KG (exclusive of packing and accessories)
|
||
Software:
Operating system: Windows 7, Windows NT, Windows 2000, Windows XP ,VISTA
