LaserSE

All Lasers in Life Science Industry info@laserse.com

Hantek DSO1122S Handheld Isolated Oscilloscope Multimeter 120MHz 1GS/s 2M Memory

  • Home
  • Hantek DSO1122S Handheld Isolated Oscilloscope Multimeter 120MHz 1GS/s 2M Memory
Sale!

Hantek DSO1122S Handheld Isolated Oscilloscope Multimeter 120MHz 1GS/s 2M Memory

$677.55

SKU: 2251832109938721 Category:

Description

  • Brand Name: Hantek
  • Certification: CE
  • DIY Supplies: ELECTRICAL
  • Origin: Mainland China
  • Model Number: DSO1122S
  • Record Length: 2M
  • Max Waveform Capture Rate: 30,000wfm/s
  • Display resolution: 640*480 Pixels
  • Band Width: 100-349MHz
  • IS Battery Demountable: No
  • Display Size: 5.0 – 6.9 Inches
  • Digital Channels: 2
  • Real Time Sampling Rate: 1GSa/S

DSO1122S 120MHz Isolation Oscilloscope

Feature
Isolated level:1000V CATII,600V CATIII.
High Bandwidth 60MHz-200MHz Oscilloscope,1GSa/s sample rate, and 6000 Counts DMM with analog bargraph , and data recorder.
1M Memory Depth.
High Refresh Rate (2500 frames)
Large 5.6 inch TFT Color LCD Display,High Resolution(640*480), Dual-Window Design –More clear, More Detailed
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
Easy-to-use pop-up menu with built-in multi-language help system
23 Automatic Measurements
Waveform Math: Add, Subtract, Multiply, and Divide
Store and recall over
Automatic cursor tracking measurements
XY Mode
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
Pass-Fail function compares a stored waveform to an unknown input
Average Mode for smoothing waveforms
Square Wave Output (2V, 1kHz) for probe adjustment
USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.
Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
LabviewVBVC Second Design instance.

Specification

Model

DSO1202S

DSO1122S

DSO1062S

Oscilloscope Mode

Vertical

Bandwidth

200MHz

120MHz

60MHz

Real-time Sample Rate

1GSa/s

Equivalent Sample Rate

25GSa/s

Record Length (Sample Points)

Single-channel: Maximum 2M; Dual-channel: Maximum 1M

SEC/DIV Range

2nS/div-2000S/div (in a 2, 4, 8 sequence)

A/D Converter

8-bit resolution

VOLTS/DIV Range

2mV/div~5V/div at input BNC

Position Range

+/-50V(5V/div),+/-40V(2V/div~500mV/div),+/-2V(200mV/div~50mV/div)+/-400mV(20mV/div~2mV/div)

Rise Time at BNC

<1.7ns

<2.9ns

<5.8ns

DC Gain Accuracy

+/-4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
+/-3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger

Trigger Sensitivity
(Edge Trigger Type)

DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
AC: Attenuates signals below 10Hz

HF Reject: Attenuates signals above 80kHz

LF Reject: Attenuates signals below 150kHz

Noise Reject: Reduces trigger sensitivity

Trigger Level Range

CH1,CH2: +/-8 divisions from center of screen

Hold off Range

100ns-10s

Trigger Level Accuracy,typical (Accuracy is for signals having rise and fall times >20ns)

CH1,CH2: +/-(0.3div x V/div) (within +/-4 divisions from center of screen)

Trigger Type

Edge

Trigger on the rising or falling edge

Video

Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

Slope

Trigger (when >,<,=) on a positive or negative slope
Set Time: 20ns-10s

Overtime

From the rising or falling edge
Set Time: 20ns-10s

Alternate

Internal trigger on edge, pulse width, video or slope

Measurement

Cursors

Manual: The difference between voltage cursors ; the difference between time cursors ; calculated by Hz.
Tracing: The voltage and time at a waveform point

Automatic

Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width

Meter mode

Max. Resolution

6,000 Counts

DMM Testing Modes

Voltage, Current, Resistance, Capacitance, Diode & Continuity

Max. Input Current

AC: 10A, DC: 10A

Input Impedance

10 MΩ

Isolation

The float voltage between BNC and Ground

600V CATIII, 1000V CAT II

The float voltage between each Channel

600V CATIII, 1000V CAT II

The float voltage between Multimeter and Ground

1000V

between input Ports directly

400V CAT II

Input by 10:1 probe

600V CATIII, 1000V CAT II

The Max input voltage of Multimeter

The float voltage between Multimeter and Ground

Display

Type

Right angle 5.6 16-digit color LCD

Resolution

640*480 dots

Contrast

16 gears, with the progress bar to show adjustment

Interface

USB host and USB slave, LAN Optional

Power

Voltage

DC Input:12–17VDC, 2000mA

Measurement

Size

245 x 163 x 52 (mm)

Weight

0.35kg

Software Support

Operating System: Windows NT.Windows 2000. Windows XP. VISTA. Windows 7.

Second Development

Supply second development demo code (VC.CVI.VB. LABVIEW) and technical support.

Related products