Description
- Brand Name: HKNA
- Origin: CN(Origin)
- Certification: CE
- Place of Origin: Guangdong, China
- Brand Name: SURPA
- Model Number: SURPA 9802
- Power: Electronic
- Measuring voltage: 9v
- Temperature range: 0℃-37.7℃
- Storage temperature: 15 °C- 60 °C
- Relative humidity: 10% -90%
- Transition point accuracy: 1/2
- Repeatability: 5%
- Weight: 7KG
- Size: 36*13*25CM
SURPA 9802 MEGOHMMETER
Measuring resistance, temperature and humidity
Temperature and humidity affect the resistance so it must be measured
Measuring impedance: 103-1012 ohms/sq
Measuring resistance: 103-1012ohms
Measuring relative humidity: 10%-90%
Measuring temperature: 0°C-37.7°C
10 volt or 100 volt test voltage
Contains electrodes: two 5 lb. hammers, 2.5 inch RTT, RTG disc electrode
LCD letters – digital display
rechargeable battery
Test bench, floor coating, wrist strap, overalls, hamstrings, bags and containers. According to EOS/ESD, CECC, ANSI, ASTM test procedures, SURPA-9802 is used to test various conductive. Anti-static, static discharge Resistance/impedance of the surface. The instrument can also test the relative humidity and temperature that affect electrical performance.
Features:
Test resistance, temperature and humidity
103-1012 ohms/square test range
10 volt / 100 volt test range
Model box
Head weight is light – 15 ounces
LCD – digital LCD display
Automatic power off
Auto zero
9 volt DC battery or 120 volt AC adapter
SURPA 9802 Megohmmeter Operating Instructions
Operation:
Before testing, please make sure the surface of the test is clean without any contaminants.
Parallel electrode impedance test
The parallel electrode impedance test method is EOS/ESD-S11.11-1993. It is used to quickly test the uniformity of planar materials. It can also be used for the measurement of multilayer materials, but the temperature of the measurement should be measured in the data report. With humidity.
Place the meter on the surface of the object to be tested.
Set the switch to the desired test voltage position, 10 volts or 100 volts.
Press the test button with approximately 5 lbs. After the meter has tested the resistance, humidity and temperature, the data will be displayed on the LCD display. This process will last for about 15 seconds.
Surface impedance in ohms/square
The temperature unit is Celsius and the relative humidity unit is a percentage.
The meter will correct the measured value after pressing the measurement button. The meter will continue to display the last test data approximately 45 seconds after the button is released.
Concentric ring probe impedance measurement (concentric ring is optional)
Plug the cable into the 3.5mm jack of the meter. Connect the banana plug to the concentric ring probe.
Place the probe on the surface to be tested and press the test button for 15 seconds. The correct temperature and humidity will be displayed on the LCD display. The displayed resistance value must be multiplied by 10 to achieve accurate test data. The reading is displayed in ohms/square, for example: 3.5×104 ohms/square (displayed reading), The correct resistance should be 3.5×104 ohms/square.
Resistance measurement between points
This step is in accordance with EOS/ESD S4.1 and tests the impedance between two points in the grounding point.
Plug the cable plug into the 3.5 mm jack of the meter and connect the banana plug to the two 5 lb. hammers
Follow the test procedure to place the weight on the object’s title side.
Turn the switch to the desired test voltage of 10 volts or 100 volts.
Press the test button until the value is displayed on the meter, press firmly on the switch until the resistance, relative humidity, temperature is displayed on the display.
Surface resistance – ground resistance test
This measurement method is used to measure the surface impedance between a point on the surface of the object and another ground point on the surface. The measurement method is in accordance with the EOS/ESD S4.1 measurement standard.
A. Meter placement: connect two test leads to the head and connect the fish clip to one of the heels, and the other end to a 5 pound hammer.
B. Connect the alligator clip to the known grounding point and place the probe on the surface of the object to be measured according to the required measurement requirements.
C. Press the test button until the LCD screen displays the resistance, humidity, and temperature test values. These readings will be in accordance with EIA, EOS/ESD ANSI, IEC-93 CECC and ASTM test procedures. When starting the test, especially high resistance materials, please Make sure that the test leads do not touch or overlap, and that the operator’s hands should not touch the probe or test leads during accurate material testing.
SPECIFICATIONS
10V accuracy
10e3-10e4+/-9%@RH<90%
10e4-10e8+/-5%@RH<90%
10e8-10e9+/-9%@RH<90%
10e9-10e10+/-25%@RH<60%
100V accuracy
10e6-10e8+/-5%@RH<90%
10e9-10e10+/-9%@RH<60%
10e10-10e11+/-15%@RH<50%
10e11-10e12+/-25%@RH<40%
Dongguan BoYee Electronic Equipment Co., Ltd. is a high-tech development enterprise integrating R&D, manufacturing and international trade. The product range covers electronics, machinery, hardware, instrumentation and many other areas. Professional manufacturing hardware and electronic tools, and provide a full range of technical advice and after-sales tracking guidance services. We focus on continuous technical improvement and product reliability, which allows us to maintain our market leadership. Our products have always enjoyed a good market reputation with their excellent quality and reasonable price. We look forward to establishing successful business relationships with customers around the world in the near future!
1. OEM Manufacturing is welcome.
2. Sample order is accepted.
3. We will reply you for your inquiry within 24 hours.
4. After shipping, we will track the products for you once every two days, until you get the products.
5. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solution for you.
6. The warranty of our products is 1 year.
Q1. What is your packaging terms?
Usually, we package our products in color boxes and brown cartons. Provide a reasonable minimum order quantity of OEM services. If you have a legally registered patent, we can package the item into your brand box after receiving your authorization. The cost depends on the quantity.
Q2. What is your payment terms?
Western Union, T/T and Paypal are 100% advanced before sending the product. If you need additional terms, please discuss with our sales staff.
Q3. What is your shipping terms?
EXW. If you need additional terms, please discuss with our sales staff.
Q4. How is your delivery time?
In general, the number of 100 sets or less is only 2-10 working days. The exact delivery time depends on the model of the material, the stock of the material and the quantity of the order.
Q5. What is your sample policy?
We do not have a minimum order quantity for sample orders. And the sample order can enjoy the fastest lead time only one day after receiving the payment.
Q6. Do you test all the goods before delivery?
Yes, we performed 100% testing before delivery and all products were tested for at least 48 hours to ensure good quality.
Q7. How do you make our business a long-term and good relationship?
1. We maintain good quality and competitive prices to ensure customer benefits;
2. We respect each customer as our friend, we do business in good faith, make friends with them,
No matter where they come from.