Description
|
Wavelength
|
808nm or up on requirement
|
|
Output power
|
500w up to 10kw
|
|
Operation mode
|
QCW
|
|
Cooling
|
actively cooled/ passively cooled
|
2. Compact: Arc and lightweight design is easily integrated into pump module.
4. Reliable and high-quality: Gold and Tin (hard solder) mounting. Works even under the most demanding climatic conditions.
5. Wavelength combination: beneficial for full temperature pumping design.
3.Excitation light source for solid-state lasers in the 1320 nm range for parenchyma surgery.
4.Defense: Short pulse operation, use as a pumping source, for lighting orin LIDAR systems.
5.Industry: Excitation light source for solid-state and fiber lasers.
|
Model ARCQCW-MA-100~500-N
|
||
|
Optical Parameters
|
||
|
Output power (W)
|
QCW 100~500*N
|
|
|
Center Wavelength at 25℃(nm)
|
808
|
|
|
Number of bars in one stack
|
1~20
|
|
|
Bar pitch (mm)
|
0.8~ 3
|
|
|
CenterWavelength Variationat 25℃ (nm)
|
±3/±10
|
|
|
Typical Spectral Bandwidth (FWHM
|
<3
|
|
|
Divergence (degree)(FWHM)
|
<3⊥< 10‖
|
|
|
Polarization
|
TE
|
|
|
Wavelength shift (nm/℃)
|
~0.28
|
|
|
Electrical Parameters
|
||
|
Working mode
|
QCW
|
|
|
Maximum Duty Cycle (%)
|
≤2%
|
|
|
Pulse Length (us)
|
50~1000
|
|
|
Frequency (Hz)
|
1~ 1000
|
|
|
Operation Current (A)
|
≤100~500
|
|
|
Operating Voltage (V)
|
≤ 2*N
|
|
|
Typical Slope (W/A)
|
> 1.1
|
|
|
Electro-optic Conversion Efficiency (%)
|
> 50
|
|
|
Thermal parameters
|
||
|
Operation Temperature (℃)
|
-40~60
|
|
|
Storage Temperature (℃)
|
-50~85
|
|
|
Storage humidity (%)
|
< 70
|
|
|
Cooling
|
TEC/Wind cooling
|
|
|
Flow rate per bar (L/min)
|
*
|
|
2. The wavelengths of each bar in a single device can be arranged and combined according to the heat dissipation conditions.
4. Heat sink structure can be customized according to customer’s special requirements.
5. The duty cycle is usually less than 2%.In case of special high duty cycle requirements, the laser structure can be customized. Then duty circle up to 20%.
Reviews
There are no reviews yet.