Description
Yongli YL-2 30kV 40w 50w 60w Power Supply for all brands of co2 laser tubes
Product Description
For 40w~60w CO2 laser tubes, our R&D Department cooperates with Electronic Assembly Dept. designed and fabricated the YL-2 CO2 Laser Tube Power Supply, which perfectly compatible with all brands of CO2 laser tubes.
Technical Parameters
|
Model No.
|
YL-2
|
|
Compatible with
|
All brands of 40w 50w 60w co2 laser tubes
|
|
Input Voltage
|
AC220V or AC110V (Optional)
|
|
AC Input Frequency
|
47~440Hz
|
|
Over Current Protection
|
Yes
|
|
Open Circuit Protection
|
Yes (Within Certain Time)
|
|
Cooling Method
|
Fan Cooling
|
|
Operating Temperature
|
-30℃ ~ 65℃
|
|
Relative Humidity
|
20-85%RH (Non-Consendate)
|
|
Vibration Resistance
|
Amplitude:1mm /Frequency 30Hz / 2 Hours
|
|
Ageing Time
|
Continuous over 4 hours / Pulse over Half Hour(Frequency 60Hz)
|
Product Details
|
Using instruction
|
1. The
power supply output end shall not be open.It should be connected with laser electrode in correct way according to instruction.
power supply output end shall not be open.It should be connected with laser electrode in correct way according to instruction.
2.The
power supply must use three hole socket,which must be connected with ground.
power supply must use three hole socket,which must be connected with ground.
3.Ensure the laser power supply is installed in a
well-ventilated room.It is strictly prohibited louver of the co2 laser power supply too close to the inner wall of the machine.(The proposed distance is 3cm)
well-ventilated room.It is strictly prohibited louver of the co2 laser power supply too close to the inner wall of the machine.(The proposed distance is 3cm)
4.The wires connected by the high voltage joint should not be overweight.
5.Pay attention to the maintenance of the power supply. If there is too much dust ,please do regular cleaning for inner and fans of the power supply.
|
Control Terminal Connection
|
|
Connection Instruction- High Level Signal Control
|
|
Connection Instruction- Low Level Signal Control
|
Expos
Every year,our company attend more than 15 international expos concerned about optics and lasers. Such as the :
-LASER World of PHOTONICS CHINA -LASER-World of Photonics -HELD IN GEMERNY -Media Expo Mumbai -Future Print- held in Brazil -EXPOPUBLICITAS-held in Mexico -CHINA INT’L SEWING MACHINERY & ACCESSORIES SHOW
···············
Reviews
There are no reviews yet.