Description

[New technology] The original divergence angle of the laser tube’s optical axis is 45 degrees and compressed to 8 degrees after FAC beam shaping, which greatly improves the light utilization rate, so that the laser can be focused to achieve an efficient focus density of 0.01-0.05. Promote,

[True and false compression technology? 】How to identify true and false FAC compression technology, the simplest identification method, small focus, fast engraving speed, wood engraving can reach 6000mm per minute, stainless steel engraving speed 3000mm per minute,

[Technical upgrade] The traditional 40W engraving stainless steel depth is 20%, and the newly upgraded 40W engraving stainless steel depth is 60%. The laser engraving accuracy is 4-6 times that of the traditional laser module. Only the actual high power can achieve fast engraving.

[Brand new original diode] This laser module is manufactured by high-tech equipment, high-quality original diode, to ensure the service life, smooth use process, precise and long-lasting engraving, clear and obvious effect, efficient light transmittance, faster and more accurate conversion speed

[Entity manufacturer] The company is a laser module manufacturer, specializing in the production and development of various types of lasers, can provide customized solutions for enterprises, and accept customization of various types of laser modules. The products have high technical content, stable quality and long service life.

Technical Parameters;

Laser light source: semiconductor blue light

Shell material: aviation aluminum

Module center material: copper

Electro-optical power: 40W

Focus power: 25W

Laser wavelength: 450nm

Power supply voltage: 12V

Power supply current: 4A (constant current)

Shell size: 33×33×120mm

Color: polar oxygen silver

Power control: PWM/TTL (signal control voltage 0-5V)

Interface specifications: 3pin 2.54 /4pin 2.54

Light shape: point-shaped fixed focus (the best focal length of the laser is 20mm according to the fixed focus column equipped)

The life span is 20000-21000 hours,

Packing list: laser module*1, glasses*1, 4P line*1, 3P line*1, short line DC*1, focal length column*1.

Can engrave: oxidized metal, wood, 201/304 stainless steel, titanium steel and anodized aluminum, stone, MDF, balsa, fabric, plastic, PCB, paper, bamboo, horns, leather, sponge paper, etc.

Not engravable: metal raw materials

Engraving must know: Engraving reflective objects must be blacked out before engraving, otherwise the reflective light will easily damage the laser lens, or the engraving will not be effective.

Cutting material: cutting plywood, cutting black acrylic board, leather, paper, etc.

If you need to replace the wires, please pay attention to the wire sequence: 3P wire connection mode, red wire 12v+, black wire GND -, yellow wire pwm+,

4P line link mode, red line 12V+, black line 12V-, yellow line TTL+, white line TTL-

Please pay attention to the wire connection sequence, confirm the connection is accurate and then power on, if you have any questions, please contact us before connecting!

Precautions:

When working with the laser, please do not touch any part of your body with the laser head, wear protective glasses, and do not look directly at the laser exit.

When the laser is working normally, avoid direct contact with the laser with your hands to prevent the laser from being damaged by the static electricity of the human body.

If the smoke is blurred when the laser head is working, please add a fan when engraving or cutting,

If you don’t know whether this laser head can use your engraving machine, you can take a picture of your engraving motherboard and send it to me. If you take a picture, you can see the letters displayed on the connection port between the engraving motherboard and the laser module, or you can add Send me the link of your engraving machine.