Description
- Brand Name: diymore
- Motor Type: DC Motor
- Certification: CE
- Origin: CN(Origin)
- Model Number: ZS-X11H
400W DC 9 -60V PWM 3 Phase DC Brushless Electric Motor Speed Controller with Hall Sensor Motor Driver Module
Description:
MA MB MC phase line output connected to the motor
5V GND The motherboard comes with 5V power supply (available external power supply current does not exceed 50MA)
VCC GND main power supply (external DC power supply)
SC speed pulse signal output (only leave the interface, no technical support)
Direction control Forward and reverse control interface (high level effective, external switch can be connected)
Speed control speed control signal input (integrated potentiometer for speed control on the board can also be connected to 0-5V analog quantity to support PWM to 0-5 signal input speed control)
Ha Hb Hc 5V GND Hall signal Power input interface, generally motors with Hall have corresponding 5 wires
Usage:
When the external PWM signal is input from the terminal of the main board (requires to remove the jumper cap on the board), it is also converted to a 0-5V signal and then entered into the main control, so there are also requirements for the amplitude frequency. Setting the 0 signal for a short time makes the master reset ready to improve the stability of the recognition PWM signal.
For analog input, you can use the on-board potentiometer to divide the voltage to adjust the speed, such as when connecting a 0-5V analog signal input from the terminal (remove the jumper cap on the board).
The forward and reverse rotation and the brake are connected to 5V through a switch, which is effective at a high level, or an external MCU can be used to give a high level signal. The front row of wiring terminals are all weak current signals directly input to the MCU main control, and cannot be touched and contacted. To high voltage and strong current.
Package Included:
1 * 400W DC 9 -60V PWM 3 Phase DC Brushless Electric Motor Speed Controller with Hall Sensor Motor Driver Module
