Description
The lowest price of XINRUI 300W – 600W CO2 laser tube for mixed Laser Cutting Machine
According to special application requirements of end users, our company has the following power for users to choose:
* E300 double fold: 300W rated power, the optical waist is located 1.5 meters outside the output coupler.one D2 300w tube
connects 2pcs HY-W150-BL co2 HV power supply.
* E400 three fold: 400W rated power, the light waist is located 1.5 meters outside the output coupler.one D3 400w tube connects
3pcs HY-W150-BL co2 HV power supply.
* E600 four fold: 600W rated power, the light waist is located 1.5 meters outside the output coupler.one D4 600w tube connects
4pcs HY-W150-BL co2 HV power supply.
connects 2pcs HY-W150-BL co2 HV power supply.
* E400 three fold: 400W rated power, the light waist is located 1.5 meters outside the output coupler.one D3 400w tube connects
3pcs HY-W150-BL co2 HV power supply.
* E600 four fold: 600W rated power, the light waist is located 1.5 meters outside the output coupler.one D4 600w tube connects
4pcs HY-W150-BL co2 HV power supply.
Product Pictures
Product Description
[Operating Condition]
Water: The coolant is pure water with a flow rate of 3-5 litres per minute and a water temperature of 10C° -40c °
Air cooling: Both ends of the laser need to conduct blow cooling. Install an axial flow fan at 50mm above the radiators at both
ends, and blow air downward, so that the aluminum heat sink on the reflector seat at each u-shaped connection receives the heat
dissipation effect evenly
Operating environment: Temperature 2-40c, humidity 10-60%.It is strongly recommended that the laser be used in a relatively
dustproof environment.
Working current: The detection current is 40Ma, the maximum allowable working current should be controlled at 40mA and below, and
the long-term working current should be controlled at 35mA and below.Longer life with current of 45mA or below.The above current
requirements must be based on the actual current of the current meter in series on the cathode line.The undesirable consequence
caused by not using as required: long-term overcurrent use will shorten the service life significantly.
Air cooling: Both ends of the laser need to conduct blow cooling. Install an axial flow fan at 50mm above the radiators at both
ends, and blow air downward, so that the aluminum heat sink on the reflector seat at each u-shaped connection receives the heat
dissipation effect evenly
Operating environment: Temperature 2-40c, humidity 10-60%.It is strongly recommended that the laser be used in a relatively
dustproof environment.
Working current: The detection current is 40Ma, the maximum allowable working current should be controlled at 40mA and below, and
the long-term working current should be controlled at 35mA and below.Longer life with current of 45mA or below.The above current
requirements must be based on the actual current of the current meter in series on the cathode line.The undesirable consequence
caused by not using as required: long-term overcurrent use will shorten the service life significantly.
Applications
600w high power co2 metal and non-metal mixed laser cuttiong machine and die cutting machine
Specification
Connection Diagram
Reviews
There are no reviews yet.