Product Description

 

High Quality Original NEJE 450nm 40W Continuous Laser Module Laser Head

 

Application: Paper cutting, Wood cutting(<5mm), Depth Engraving(<3mm), g-code drawing…

Engraving material: wood, gray paper card, non-transparent plastic, leather, paint pcba, etc.( flat, opaque and can be burned black)

Weight: 202g

Input: 12V2A (about 20w)

Output Optical Power: 5.5W

PWM: 50KHz-20KHz / 3.3V-12V

Temperature Sensor: yes

Focus Range: 30mm-50mm

Max Cutting Thickness: 5mm (Light diameter: 0.1mm-0.2mm)

Minimum Focus Diameter: 0.1mm

NOTE: It is heavier, not suitable for engraving, only suitable for cutting!

Main applications: cutting, drawing etc.

Interface specification: 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)

Wavelength: 450nm

Radiator size: 30*80mm

Material: copper + aluminum

Weight: 202g

Drive position: built-in

Is the power adjustable: PWM can be adjusted, PWM: 50KHz-20KHz / 3.3V-12V

Drive protection: surge protection, overvoltage protection

Input power: approx. 12V2A, about20W (without fan power)

Output optical power: 5.5W

Line length: 300mm

Control line installation method: pluggable

Fan size: 30*10mm

Fan speed: 15000 rpm

Controllable temperature: less than 60 degrees Celsius

Best focus range: 40mm-50mm

Max cutting thickness: 10mm (Recommended focus position: 45mm from the light exit

Safety Warning: Please apply this module under the premise of safety protection!

Recommended application machine: NEJE Master

Note: NEJE Master comes standard with 12V2A charger. If you want to upgrade your

old machine, you need to prepare another 12V3A power supply.

Packing list:

1 x module

2 x screw

2 x gasket

1 x control line