Description
30W 51mm 450nm Blue Light Laser Head Fixed Focus DIY Carving Engraving Machine Engraver Accessory DIY Tools Laser Module Head
Free Gift:Glasses+1pcs 3pin cable+1pcs 2pin cable+20mm Focal length column(Suitable for all control panels in our shop!)
Laser size:
The new laser adds an iron sheet, which is good for heat dissipation:
| 15w | 30w | 40w | |
| Optical Lens | φ 6 glass |
φ 6 glass |
φ 6 glass |
| Fan | 12v | 12v | 12v |
| Service life | 10000 hours | 10000 hours |
10000 hours |
| Radiator size | 48mm*60mm*94mm | 40mm*40mm*70mm | 48mm*60mm*94mm |
| Weight | 202g | 202g | 202g |
| Input | 12v 2.5A | 12v 2.5A |
12v 2.5A |
| Optical Output power | 7.5w | 15w | 15w |
| Electric Power | 15w | 30w | 40w |
| Wavelength | 450NM | 445NM | 450NM |
| Precision | 0.01MM | 0.01MM | 0.01MM |
| lens focallength | 20mm | 20mm | 20mm |
| Speed of the fan | 15000rpm | 15000rpm |
15000rpm |
| Interface | 3 pin | 3 pin |
3 pin |
| Product mearial | Aluminum 6061 anode/copper H59 | Aluminum 6061 anode/copper H59 |
Aluminum 6061 anode/copper H59 |
| Cooling copper core | 60mm copper with screw thread | 60mm copper with screw thread |
60mm copper with screw thread |
| Cutting depth | Max 5MM(repeatedly) | Max 5MM(once) | Max 5MM(once) |
| Quality assurance | 1 years | 1 years |
1 years |
| Laser Beam Module | Dot | Dot |
Dot |
| PWM | 5v,0-20Hz | 5v,0-20Hz |
5v,0-20Hz |
| Working Temperature | 0℃-60℃ |
0℃-60℃ |
0℃-60℃ |
| Material | Pass | Pass | Pass |
| Corkwood 1mm | 1 | 1 | 1 |
| Corkwood 2mm |
1 | 1 | 1 |
| Corkwood 3mm |
1 | 1 | 1 |
| Corkwood 4mm |
2(100mm/min) | 1 | 1 |
| Corkwood 5mm |
2(100mm/min) |
1 | 1 |
| Plywood 3mm | 3 | 2 | |
| Stainless steel 304/316 | Carving | Carving |
Carving |
| 30w/40w Cutting and engraving effect display | ||||
| Material | Thickness | Pass | Time | Sample |
| Corkwood | 1mm | 1 | 6mm/s |
|
| Corkwood | 2mm | 1 | 3.5mm/s | |
| Corkwood |
3mm | 1 | 2.5mm/s | |
| Corkwood |
4mm | 1 | 2mm/s | |
| Corkwood |
5mm | 1 | 1.5mm/s | |
| Plywood | 3mm | 3 | 2mm/s | |
|
Stainless steel 201/304/316 |
Carving (100mm/s) |
Carving (100mm/s) |
Carving (100mm/s) |
|
Connect 3pin cable :
Free software,contact us,get link:
CAUTIONS!!
1.The laser light emitted by the laser module is likely to injure persons’eye, so do not directly
gaze its end surface and wear appropriate safety glasses to prevent laser light when it is
working.
2.Laser module needs an appropriate laser driver(PCB). When the laser module connects
with power supply,please set the output voltage to zero. The adjustment of the current
should be slowly increased or decrease to avoid damaging the device.
3.Keep the device working or storing in a dry environment. The anti-dust grade is over one
million, in order to prevent dust inside the lens to affect the laser dot shape.
4.Working at high temperatures will increase the threshold current, reduce conversion
efficiency and speed up the aging of the device.
5.When output power is higher than it’s specific parameter of operation, it will accelerate
the aging of the device.
6.When the operation temperature of the laser diode is over 70degree, please do well heat
dissipation of it.This laser module is an electrostatic sensitive device.Please make
sure ground yourself or wear an antistatic wrist strap before you take it.
Reviews
There are no reviews yet.