LaserSE

All Lasers in Life Science Industry info@laserse.com

150w co2 laser power source Z150 with screen for 130w 150w 180w tube for Marking and Engraving compared with Raycus Laser

  • Home
  • 150w co2 laser power source Z150 with screen for 130w 150w 180w tube for Marking and Engraving compared with Raycus Laser

150w co2 laser power source Z150 with screen for 130w 150w 180w tube for Marking and Engraving compared with Raycus Laser

$236.54

SKU: 3452141018651 Category:

Description

150w co2  laser power source Z150 with screen for 130w 150w 180w tube

Product Description

 

 

 

Model: Z150 laser power supply for RECI,EFR,YONGLI,WEEGAINT 130watt/150watt laser lamps

Packing List

<1> Z115 laser power supply*1pc;

<2> Z Screen*1pc;

<3> 2m HV cable with connector*1pc

 

I. Z150 Intelligent Laser Power Supply with Screen Main Feature

1. PFC wide voltage AC90V-AC250V input, global universal.

2.  High intelligence: Z150 power supply can communicate with motion controller,the controller panel can display Z150 power supply working condition, the users can know and judge the fault easily 

3. Open circuit protection function, if the output high voltage open circuit or not connected well, the Z150 power supply will automatically cut off the high voltage.

4.   Multi-function LCD screen: One LCD screen can show two Z150 power supplies working condition, easy used for 130w-150w double-heads laser cutting machines. 

5.  High voltage discharge function, no residual voltage after turn off, very safe for user. 

6. Excellent cover with patent design: Good appearance, better heat dissipation. 

 

II. Z150 Laser Power Supply specifications

Item

Z80

Z100

Z150

Input

Input voltage

AC90-250V

AC frequency

47—440Hz

Max input power

500W  

700W 

900W

Max input current

(when 90V input)

6A  

8A 

10A

Output

Max output voltage

40KV

45KV

55KV

Max output current

28mA

32mA

38mA

Efficiency

≥90%(when full load)

MTBF

≥10000 hours

Response speed

≤1mS(the time from the signal is given to output current

reaches 90% of set current)

Switch control mode

TTL

Power control mode

PWM(>20KHz) or 0-5V or 0-3.3V analogue

Communication mode

Special serial port

Withstand voltage

Input-output, input-shell:AC1500V 10mA 60s;

Working environment

Temperature(-10~40)℃, relative humidity:≤90%

Cooling

Force air cooling

Dimension

L*W*H(mm)

235*144*104

278*144*104

330*144*104

Weight

(KG)

2.15kg

2.45kg

3.2kg

Color

Silver

 

Z series 2.jpg

z150 (5)z150 sizeZ150.jpg

 

 

 

V.Z150 laser power supply Manual Test Method

Firstly make sure Z150 power supply and laser tube correct well, disconnect the control terminal and press the RED button” TEST” on Z150 power supply for 5-10seconds to check if there is laser output from laser tube.This method is easily to judge if power supply is ok.

 

Additional information

Model Number

Z150

Reviews

There are no reviews yet.

Be the first to review “150w co2 laser power source Z150 with screen for 130w 150w 180w tube for Marking and Engraving compared with Raycus Laser”