LaserSE

All Lasers in Life Science Industry info@laserse.com

UV laser mark 3W 5W 10W 355nm UV Laser Welding Machine for uv laser protection phone glass

  • Home
  • UV laser mark 3W 5W 10W 355nm UV Laser Welding Machine for uv laser protection phone glass

UV laser mark 3W 5W 10W 355nm UV Laser Welding Machine for uv laser protection phone glass

$4,610.00$7,137.00

SKU: 3468096018651 Category:

Description

Products Description

Brand new design 3watt 5watt UV Laser Marking Machine

UV Laser Marking Machine Description
UV laser marking machine series,the principle with the laser marking machine similar, are using a laser beam in a variety of different material surface marked with a permanent mark. Marking effect is through the short wavelength laser directly interrupted the molecular chain of matter (different from the long-wave laser generated by the evaporation of the surface material exposed deep material) to show the required etching patterns, text. Can be achieved in the assembly line on-line flight marking function, mainly for the thin fragile items such as shallow markings: photovoltaic solar glass. On the basis of cold working, the effect of processing the material will be better results, better development, in the use of cold laser processing, the material impact of the probability reduced to one percent.

Product Paramenters

Product name
UV Laser marking machine
Machine Power
3W 5W(Optional)
Laser wavelength
355nm
Pulse repetition rate
20–200KHZ
Pulse width
<20ns@30KHz
Average power(W)
3W/5W
Average power stability
<±2% over 23 hours
Pulse-to pulse instability
<3%rms
Spatial mode
TEM00(M2<1.3)
Beam divergence
<2mrad(full angle)
Beam diameter
0.6±0.1mm
Cooling method
Air-cooling
Relative humidity
10%-80%(non-condensing)
Warm-up time(mins)
<10
Operating voltage
110V/220V(Optional)

Product configuration


355nm UV Laser source

Brand new air-cooled design,It can work normally without a chiller.

It is more convenient for your marking work.


UV Scan Head

–It has the advantages of fast marking speed and high marking accuracy.

It has double red lights, which makes it easier for you to find the focus.

360 degree rotation design

–It will make your marking work more convenient.

Sample

Applicable Industry:
Mainly applied on shiny material marking, such ad mobile phone screen,LCD,optical device,auto glass etc.Also it applied for processing coating film on the most metal and non-metallic materials.Such as hardware,ceramic,glasses and clocks,PC,electronic components etc.

Features:
1.–No thermal effect and scorch problem
UV laser source is cold laser source.It outputs shorter wavelength,smaller focus spot.The marking effect is precise and refined due to the good quality laser beam without thermal effect and scorch
2.–Wide Application:UV laser can be absorbed by most of material due to its shorter wavelength
3.–Eco-friendly and high-productivity:no toxicity,high marking speed as well low power consumption

Additional information

Model Number

UV Laser marking machine

Power

5W, 3W

Reviews

There are no reviews yet.

Be the first to review “UV laser mark 3W 5W 10W 355nm UV Laser Welding Machine for uv laser protection phone glass”