Description
- Origin: CN(Origin)
- Certification: CE
- Condition: New
- Model Number: Laser Engraving
- CNC or Not: CNC
- Is Smart Device: YES
- Output power: 450 nm, 7.5 W
- Control board: 1 x MCU radio control MEMS
- Satety Protection: MEMS
- Working size: 460 x 810 mm
- Pixels: 1466 x 1600 pixels
- Point spacing: 0.075 mm
- Support NEJE series software 1: NEJE APP for Android
- Support NEJE series software 2: NEJE Wireless APP for iOS
- Support NEJE series software 3: NEJE Wireless APP for ipadOS
- Support NEJE series software 4: NEJE Wireless APP for macOS
- Support NEJE series software 5: NEJE software for Win 7
- Support NEJE series software 6: NEJE software for Win 8.1
- Support NEJE series software 7: NEJE software for Win 10 above
- NEJE software upgrade service: YES
- NEJE Cloud Gallery: YES
- NEJE scanner function: YES
- Frame material: CNC cutting composite board, aluminum alloy, acrylic.
- Can engrave: MDF / balsa / paper / wood / fabric / plastic / leather / plywood / fo
- Can not engrave: metal / glass / stone / ceramic / PCB / stainless steel / reflective m
- Continue working: Unlimited
- Wavelength: 450nm
- Beam shape: point (focusable)
- Drive: Built-in
- Lens material: D-ZK3
- Heat sink material: aircraft aluminum brass shell
- Input voltage: AC100-240V, 50/60 Hz
- Output voltage: 12V3A
- Image format: bmp .jpg .png .nc .dxf etc
-
【32-Bit-Motherboard 30W Max Laser Engraving Cutter】 NEJE Master 2 Max 30W laser engraving machine with wireless control function,upgraded newest firmware, smarter, faster, higher precision and easier to use.Large working area 460 * 810 mm.Our Laser Master could control laser beam more accurately to 0.075mm.
-
【Powerful 7.5W optical power Module】 7.5W Optical power output, 3mm acrylic from 1 pass(speed 100).The powerful module can engrave/carving depth max. 4 mm and cut wood depth 3-8 mm . The module is changeable,you can also replace the module with other NEJE module sold in our store, depending on your own requirements.
-
【Widely compatible software】The NEJE Master 30W MAX Engraving Machine Engraver supports NOT ONLY NEJE software but also third party open source software. The official NEJE software is suitable for beginners, simple and easy to use. The third party software (benbox / laserGRBL / Lightburn) is suitable for CNC programmers. There are also software download methods and related manuals on the wiki (wiki.nejetool.com).Supports Windows 7, 8, 10, Mac iOS, Android .
-
【Protection function】1.Built-in gyroscope protection device. When the laser engraver machine is running, the built-in gyroscope will record the working position at the beginning. In the event of an accidental touch or machine shift, the machine will automatically stop working to prevent an accident. 2.Built-in protective glass to protect eyes,even without wearing protective glasses, the operation is more saety
Product description
30W power module, optical power output 7.5W, 3mm acrylic from 1 pass(speed 100), focal point 0.1mm, support engraving and cutting.
Safety design, the laser module comes with a protective panel design to block more than 90% of the leaking light; built-in MEMS Roll protection.
Two ways to adjust the focus, you can directly adjust the focus, you can also adjust the focus to a fixed position, use a fixed thickness board to adjust the focus, which can simultaneously take into account the use of engraving and cutting.
Support NEJE 4pin interface series modules, including 3500mw, 7W, 20W, 30W, 40W, etc.
30W Product Specification
Output power: 450 nm, 7.5 W.
Control board: 1 x MCU + radio control + MEMS
Satety Protection: MEMS
Working size: 460 x 810 mm
Pixels: 1466 x 1600 pixels
Point spacing: 0.075 mm
Support NEJE series software: NEJE APP for Android, NEJE Wireless APP for iOS / ipadOS / macOS, NEJE software for Win 7 / Win 8.1 / Win 10 above (Windows 7 must install the .net 4.8 software environment, does not support Windows XP) , N-Scanner APP for Android.
NEJE software upgrade service: YES
NEJE Cloud Gallery: YES
NEJE scanner function: YES
Frame material: CNC cutting composite board, aluminum alloy, acrylic.
Can engrave: MDF / balsa / paper / wood / fabric / plastic / leather / plywood / foam paper / anodized aluminum
Can not engrave: metal / glass / stone / ceramic / PCB / stainless steel / reflective material / transparent material
Continue working: Unlimited
Wavelength: 450nm
Beam shape: point (focusable)
Drive: Built-in
Lens material: D-ZK3
Heat sink material: aircraft aluminum + brass shell
Input voltage: AC100-240V, 50/60 Hz
Output voltage: 12V3A
Image format: .bmp .jpg .png .nc .dxf etc .
Reviews
There are no reviews yet.