✅ New eye protection design→ The laser protective cover perfectly protect our eyes when working. Without wearing goggles, people around can watch laser engraving.

✅ Advanced firmware→ Ortur laser master firmware, smarter, faster, more accurate and easier to use. Professional motherboard with 32-bit MCU. It can preprocess 32 instructions, support up to 921600 baud rate, more powerful. The engraving speed can be as high as 3000mm/min. (If the laser engraving result is not considered, the moving speed can be as high as 1000mm/s).

✅ Excellent safety protection→ There is a G sensor on the main board, if the machine detects unauthorized movement, the laser beam will stop. 2: If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop moving,the laser beam will stop to prevent fire. 3: If the laser engraver is under control, but the user forgets to operate and keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.

✅ Wide compatibility→ The 7W laser engraver can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.

✅ Excellent safety protection→ There is a G sensor on the main board, if the machine detects unauthorized movement, the laser beam will stop. 2: If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop moving,the laser beam will stop to prevent fire. 3: If the laser engraver is under control, but the user forgets to operate and keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.